Renovation of a municipal facility in Ponca City, Oklahoma. Completed plans call for the renovation of a municipal facility.

The Oklahoma Municipal Power Authority ("OMPA") is requesting Bids in accordance with the terms of this Request for Proposal ("RFP") for: Fall Protection Upgrade Bids must be submitted in a sealed envelope marked and addressed to: Michael Watt, Manager of Environmental, Compliance, and Safety Oklahoma Municipal Power Authority 2701 West I-35 Frontage Road Edmond, Oklahoma 73013 OMPA will accept questions regarding this RFP until October 20, 2022, at 4:00 Central Time. Responses to all questions posed will be made on the OMPA. Each Bid must be submitted in accordance with the "Requirements for Bidding and Instructions to Bidders" contained in this RFP. Each Bid must be accompanied by a certified check, cashier's check, or bid bond equal to five percent (5%) of the Bid. Each Bid must include a completed Non-Collusion Affidavit and other required documents, as stated in the RFP. If OMPA, in OMPA's sole discretion, elects to award a Contract pursuant to this RFP, the prevailing Bidder will be required to provide acceptable security guaranteeing performance, payment, and maintenance in an amount equal to their bid. OMPA is requesting quotes for supplying fall protection upgrades at Kaw Hydroelectric Plant in Ponca City, Oklahoma. Successful Bidder shall be required to attend OMPA Safety Training prior to work commencing on the project. All employees will be required to wear Flame Resistant Clothing (FR), Safety Boots, Hardhats, Gloves, and Safety Glasses. Outerwear such as coats and coveralls shall be FR as well. The following upgrades will be performed: Handrails Successful Bidder shall install handrails at the Kaw Hydro Facility to the following specifications: 1. Metal Construction. 2. Install in accordance with OSHA standard 1910.29. 3. Finished rails should be painted safety yellow and rated for exterior use. 4. 906 Level - Materials used must be Galvanized or stainless. Please provide pricing for each option if available. 5. 996 Level - Remove narrow gate and widen handrails to width of ladder. Reinstall new gate provided by bidder. 6. Install access to a/c units outside of the control room with gate installed for access and approximately 15ft of handrail. Industrial scaffolding provided by the bidder will be used for access during installation 7. Handrail and gate to be installed to the roof of the battery room to include approximately 13ft of handrail and gate provided by bidder. 8. 906 Level replace 3 ladders and install 3 matching gates. Fill in gaps from walls to ladder with handrails. Build handrails around butterfly valve pin Lock Out. Install handrails around the access to the penstock. 9. Roof Top handrail. See attached picture. 100% tie off will be used for rooftop installation.