Site work and new construction of a pre-engineered storage facility in Florence, Alabama. Completed plans call for the construction of a pre-engineered storage facility; and for site work for a pre-engineered storage facility.

All questions should be directed to the Lauderdale County Commission, 200 S. Court Street, Room 303, Florence, Alabama 35630, phone 256-760-5859 36' x 36' Pole Barn, All posts must be "For Farm Use" .60 CCA treated, Vertical 2 x 6's must be "For Farm Use" .60 CCA treated, Horizontal 2 x 6's at ground level must be "For Farm Use" .60 CCA treated, 6x6 posts must be installed 30" deep in pre-dug hole & filled with concrete and be 12' out ofthe ground, All metal for roofmust be 26-gauge galvanum, All metal for siding must be 26-gauge, Wood truss on 4/12 pitch on 36" centers, Wood truss - 36' long with 12" overhang, Use 2 x 4 lad boards on trusts on 24" centers, Inside kick boards are to be 11 boards high, Put 2 x 6's on top of all inside walls, Must be 44" openings between 4 x 6's for inside doors, Use 2" x 4" galvanized horse panels in stall openings next to inside doors (See picture of outside doors),Outside door frames made out of 1-1/2" square tubing - 11 gauge Frame of each door is 6'3" wide x 10' high (see picture), Use ball bearing door rollers for both inside and outside doors (See picture of how inside doors are to be hung and made) Inside ground level kick boards are to be 2 x 8 "For Farm Use" .60 CCA treated, All other 2x8 kick boards are non-treated, All vertical 2 x 6's must be installed 12" deep in a pre-dug hole & then filled with concrete, Outside 2 x 6's must be 12' high -inside 2 x 6's must be 8' high