Estimated cost range is $75,000 - $90,000.
The requirements and specifications for the removal and replacement of approximately 427 linear feet of six-foot-tall wrought iron fencing including posts, footings, and (2) sets of 6-foot-wide double access gates at LMD 128 located at Spanish Broom Drive & Zinnia: o CONTRACTOR shall coordinate a pre job meeting at the project site with the Landscape Superintendent or appointed designee at least five working days prior to commencing any work under the terms of this agreement. o CONTRACTOR shall contact DIG ALERT, secure a DIG ALERT ticket, and verify all underground utility markings prior to beginning any excavation. o CONTRACTOR shall secure a "No Fee" encroachment permit from the City of Palmdale Engineering Department. o CONTRACTOR shall cover and make safe all excavations prior to leaving the project site. NO EXCAVATIONS MAY BE LEFT OPEN OVERNIGHT! o CONTRACTOR shall be responsible for securing project site with temporary fencing and/or caution tape and barricades. o CONTRACTOR will be responsible for any/all damages to any/all private and/or City infrastructure, underground or overhead utilities, and/or any structure, fixture, improvement, and/or appurtenance caused by Contractor and/or resulting from Contractor's performance of work. o CONTRACTOR shall be responsible for design and implementation of all traffic control and safety delineation required at the project site as per the California Manual on Uniform Traffic Control Devices latest revision. Note: Traffic Control Plans, prepared, signed, and stamped by registered Traffic Engineer or Civil Engineer, on 24" X 36" sheets, shall be submitted to the City Traffic Engineer for approval when any of the following conditions apply. o Moving traffic over the striped center line.
o Reducing the number of travel lanes in a direction by more than one lane.
o Any road closure (one or two way) or flagger/pilot car operation.
o Any work performed within 250 feet of a traffic signal Q&A Deadline
11/22/2022 5:00 PM (PDT) Pre-Bid Meeting
No Bid Bond
0.00%
Payment Bond
100.00%
Performance Bond
100.00% Start/Delivery Date
Estimated January 2023 License Requirements
California Class C-13 FENCING Contractor's license Project Type
Bid
Response Types
Line Items
Cost File
Response File
Type of Award
Lump Sum Completion Date: 365 Calendar Days *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.
.webp)
