Site work, paving and new construction of a mixed-use development in Cape Coral, Florida. Completed plans call for the construction of a 15,160-square-foot municipal facility; for site work for a road / highway; and water / sewer project.

As of September 17, 2024, this project is under construction and expected completion by early 2025. The project consists of a new 4,471 sq. ft. EMS Training Facility and a 10,689 sq. ft. Drill Tower on a 6.29-acre site. The work is to include, but not limited to drainage, utilities, site development, asphalt & concrete paving, concrete & masonry work, polished concrete floor, tube steel columns & beams, misc. steel & metal decking, cold form metal framing, cold formed metal roof trusses, rough carpentry, casework & tops, thermal lining system, wall insulation, foam in place insulation, foam in place masonry wall insulation, air & moisture barriers, waterproofing, caulking, standing seam roofing & sheet metal flashings, metal soffit panels, firestopping, doors/frames/hardware, overhead doors, aluminum framed entrances and storefront, drywall and metal studs, stucco, acrylic plaster finish, ceramic tile, vinyl base, epoxy concrete floors, acoustical ceilings, painting, signage, wall protection, toilet compartments and accessories, fire extinguishers, flagpole, metal lockers, roller window shades, elevator doors, fire suppression system, gas piping, plumbing, HVAC, electrical, communications and structured cabling, electronic safety and security systems, fencing and gates, etc. Project plans and bidding documents will be sent out via electronically.