Renovation of an educational facility in Worcester, Massachusetts. Completed plans call for the renovation of a educational facility.

For Consolidation of existing I.T. room. General Scope Requirements 1. In general, the BIM scope of work for the Project is to create a technically accurate and detailed 3D computer model of the architectural, structural, mechanical, plumbing and electrical systems. 2. The computer model (in plan view) shall extend to five feet beyond the exterior walls of the building. Vertically, the model shall extend from the lowest extent of the foundations up through and including the roof of the top-most floor and penthouse. To the extent that the scope includes building systems, those systems will be included to the full horizontal and vertical extents of the model including underground utilities and roof mounted items. 3. The level of detail defined in the Specific Scope Requirements is the minimum level of detail required in the model. Greater detail than the minimum should be incorporated into the model where important details are necessary for communicating information about a system. 4. Each Trade Contractor shall provide shop drawings in both 2D and 3D model format. 5. The 3D model shall be located and oriented to the pre-determined world coordinates for the project to allow easy integration into the BIM for the project. 6. The 3D model shall include the project control grid. This grid should be visible when viewing the model in a true view along the X, Y or Z axis. 7. The 3D model shall be layered and constructed in a manner such that all elements of the model can be converted into a 2D dimensioned drawing for use in the field.