Renovation of a municipal facility in Collierville, Tennessee. Conceptual plans call for the renovation of a municipal facility.

Update: https://www.colliervilletn.gov/home/showpublisheddocument/6359/638658143551670000 This project will consist of replacing the flat roof system covering Town Hall. Approved funding will pay the cost for a licensed engineer to prepare construction drawings and perform construction administration. (The State of Tennessee requires a licensed engineer to prepare and seal with his/her stamp the drawings of roof construction project costing more than $25,000.) The remaining approved funding will be directed toward contracting with a roof contractor to remove the existing layers of roof and insulation materials down to the metal deck and install 2 layers of no less than R-30 insulation material, base roof material sheeting modified granulated cap sheet, new plywood on parapet walls, flash walls with torch applied roof material and shop fabricate needed metal components for a complete project. A 20-year manufacturer's warranty will be supplied following acceptance of the finished product. Project is included in Town of Collierville Fiscal Year 2025-2029 Page no.42 ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- This project is included in the Town of Collierville's fiscal years 2024-2028 Capital Improvement Plan (CIP). As of January 18, 2024, further details regarding design and construction have not been identified. A firm timeline for construction has not been established; however, funding is allotted to fiscal year 2026. A detailed scope has not yet been released. This project will consist of replacing the flat roof system covering Town Hall. Approved funding will pay the cost for a licensed engineer to prepare construction drawings and perform construction administration. (The State of Tennessee requires a licensed engineer to prepare and seal with his/her stamp the drawings of roof construction project costing more than $25,000.) The remaining approved funding will be directed toward contracting with a roof contractor to remove the existing layers of roof and insulation materials down to the metal deck and install 2 layers of no less than R-30 insulation material, base roof material sheeting modified granulated cap sheet, new plywood on parapet walls, flash walls with torch applied roof material and shop fabricate needed metal components for a complete project. A 20-year manufacturer's warranty will be supplied following acceptance of the finished product. *Project information has been obtained through a public capital improvement plan (CIP). A CIP is a financial schedule for short- and long-range projects which is updated regularly. Information listed in the CIP often evolves based on funding availability and the project details, including timeline and value, are subject to change. The content management team will continue to pursue additional details as they become available.