Site work for a water / sewer project in Christina Lake, British Columbia. Completed plans call for site work for a water / sewer project.

Through this Request for Proposals, the Regional District of Kootenay Boundary invites Proposals from qualified Respondents to design, supply and install new boardwalk and viewing platform equipment at Christina Lake. The successful proponent will be responsible for supplying full design and construction services for this project. This will include but not be limited to the following: (a) Rough grading of the site as required for the dock installation. (b) Two 2.5m x 7.3m aluminum/composite platforms (c) One 6.1m x 6.1m aluminum/composite platform with a supporting aluminum frame (d) Four steel piles holding the platforms in place. (e) Non-skid composite decking panels supplied by ThruFlow(TM), allowing 43% sunlight penetration, with a base material must be of reinforced virgin polypropylene. (f) Top quality PVC-encapsulated dock floats fastened to four piles around the platforms, fastening the dock in place with pile stirrups. (g) An aluminum ramp with handrails to be fastened with a metal T-bracket to the top of the abutment. The ramp must be removable during the winter months. (h) A 2.75m x 2.75m abutment to be constructed at the edge of the shoreline above the highwater mark, supported by seven 152mm x 152mm (6" x 6") pressure treated wood posts set in concrete approximately 300mm in diameter running 1,800mm into the ground. (i) An area not exceeding 1m in diameter around the abutment will be excavated for construction and backfilled afterward. (j) A layer of crushed gravel will be laid on top of the backfilled earth supporting a concrete platform which will form the top of the abutment. (k) Design must meet or exceed CAN/CSA-B651 Accessible Design for the Built Environment (l) The equipment and design shall match as closely as possible with the proposed Preliminary Design, found in Annex C.