Renovation of a water / sewer project in Richmond, Texas. Completed plans call for the renovation of a water / sewer project.

Removal and replacement of existing chemical feed pumps with new diaphragm style skid mounted pumps. . Remove and dispose of existing sodium hypochlorite pumps, stands, pipes, valves, tubing, gauges, supports, etc. as required for new skids installation . Remove and dispose of existing sodium hydroxide pumps, stands, pipes, valves, tubing, gauges, supports, etc. as required for new skids installation . Remove and dispose of existing polyaluminum chloride pumps, stands, pipes, valves, tubing, gauges, supports, etc. as required for new skids installation . Remove and dispose of existing sodium permanganate pumps, stands, pipes, valves, tubing, gauges, supports, etc. as required for new skid installation . Perform surface preparation of existing concrete pads in accordance with NACE No. 6/SSPC-SP13 joint surface preparation standards price to include removing existing anchor bolts flush to pad, applying grout over bolts, and removing grit generated by surface preparation . Install sodium hypochlorite skids including pumps, piping, valves, calibration chamber, fittings, gauges, supports, strainer, etc. Connect to existing suction and discharge piping, power supply, control cables as required for new complete and operational system . Install corrosion inhibitor skid including pump, piping, valves, calibration chamber, fittings, gauges, supports, strainer, etc. Connect to existing suction and discharge piping, power supply, control cables as required for new complete and operational system . Install additional 1-Inch SCH 80 PVC pipe as approved by the Engineer for unknown conditions . Install additional 1/2-Inch SCH 80 PVC fittings as approved by the Engineer for site changes (price to include 900, 450, 22.50 bends) Bidders desiring further information or further interpretation of any part of the Contract Documents are hereby obligated to submit a written request online to the www.CivcastUSA.com system for such information to Engineer not less than 48 hours before the Bid opening Question Deadline 05/23/2023