Site work and paving for a road / highway in Kalamazoo, Michigan. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The scope of work for this project shall consist of furnishing and applying uniformly retro-reflectorized pavement markings of the type specified herein and at the specific locations designated by Project Manager or designee, including but not limited to long-lines, symbols, stop bars and crosswalks to City streets. Work shall also consist of removing existing pavement markings and applying new. The scope of work for this project shall consist of furnishing and applying uniformly retro-reflectorized pavement markings of the type specified herein and at the specific locations designated by the Project Manager or designee, including but not limited to long-lines, symbols, stop bars and crosswalks to City streets. Work shall also consist of removing existing pavement markings and applying new pavement markings on North St, Rose St, Fulford St, and Wallace Ave in accordance with the plan sheets (see Appendix B) included in this package and as directed by the Project Manager. All materials and placement thereof will be in accordance with MDOT specifications and will meet MDOT specified reflectivity specifications. The City retains the option of measuring the retro reflectivity readings of the pavement marking applied by the Contractor. Re-striping work will include the application of new material over faded or worn existing pavement markings. This work will be done in accordance with the schedules noted in this document. It is estimated that no layout work is necessary as the Contractor should be able to retrace existing markings. Project work will include the application of pavement markings on paving, chip seal projects, or other special project requests. However, it is only anticipated that pavement markings be utilized on the four projects as listed in Appendix B. Project work will be completed according to the schedule noted in this document. The Contractor will be responsible to install any legends required for the project immediately after longitudinal lines are installed. Project work may be laid out by the agency or by the Contractor. If projects are laid out by the agency, layout of legends, lane width, shoulder width, transitions, beginning, and ending of markings will be provided. Is this case, the Contractor may still need to layout edge line, rope in curves and tapers, and any other layout marks necessary to complete the work. Project work may also be requested to be laid out by the contractor. In this case, the Contractor will use the Witness and Log method for layout of markings on the roadway. This is defined in Section V.11. of this bid document. All necessary traffic control, labor, materials, tools, equipment, and other items incidental to the work being performed shall be included in the Contractor's unit price for this contract. Such items will not be bid or paid for separately but shall be included in the overall unit price. The bidder shall furnish all labor, supervision, supplies, tools, equipment, and other means necessary or proper for performing and completing the work. The bidder shall be responsible for the cleaning up of the job site and shall repair or restore all structures and property that may be damaged or disturbed during performance of the work to the satisfaction of the Public Services Department for the City of Kalamazoo. Drainage structure covers shall be salvaged and reused if in usable condition; otherwise, they shall be replaced. Where needed, all traffic control used for such operations as defined by the MMUTCD will be the responsibility of the bidder. Questions for this IFB should be directed to: Department Contact: George Waring, Senior Civil Engineer, Public Works, waringg@kalamazoocity.org or (269) 303-7844