Site work and paving for a road / highway in Caro, Michigan. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Please contact Brent Dankert, Tuscola County Highway Engineer at 989-233-7472 or highwayengineer@tuscolaroad.org with any questions. Any addenda must be noted and initialed. The Contractor has examined the proposal, permits, plans and the location of work described here in and is fully informed as to the nature of the work and the conditions relating to its performance. All work shall be done in accordance with Section 501 of the 2020 MDOT Standard Specifications for Construction, and as modified herein and as per attached supplemental specifications and provisions. The work shall be at various locations throughout Tuscola County or state highways under the maintenance jurisdiction of the Tuscola County Road Commission. The work shall consist of placing and compacting hot mixed asphalt in order to patch existing asphalt roads. Contractor shall provide the Tuscola County Road Commission 7 days advance notice prior to mobilize to allow for any prep work to be completed. Patching shall be completed within 14 days of notification unless approved otherwise by the Engineer or work shall be forfeited to next available contractor and/or Liquidated damages may be assessed at a rate of $100.00 per day per project location. The Contractor shall follow the construction methods as described in Section 501.03 of the 2020 MDOT Standard Specifications for Construction except as modified herein: 1. Paver: Each paver must be equipped with a full-width vibratory or tamper bar screed that can spread and finish the HMA to the required cross section and grade. Use a paver that produces a uniformly finished surface free from tearing or other blemishes and free from measurable segregation.