Site work and paving for a road / highway in Bozeman, Montana. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Chip Seal Red Cliff South Bozeman Area The Montana Department of Transportation (MDT) is requesting bids for Chip Seal Red Cliff South Bozeman Area. Be sure to certify and submit your response once completed. SPECIFICATIONS FOR WORK: Contractor shall provide all labor, equipment, materials, incidentals, and traffic control necessary to produce, haul, place, roll and broom approximately 169,105 square yards of laid-in-place chip seal. The chip seal will be approximately 10.3 miles long and 28 feet wide. Contractor shall provide CHFRS-2P asphalt emulsion and Type 1 chips. Traffic control with pilot cars must be maintained until dusk or fading light each workday as determined by the Project Manager. Contractor must provide enough pilot cars to keep traffic stops to a maximum of 15 minutes. The emulsion application rate for chip seals is estimated at .43 gallons per square yard. The cover material application rate is estimated at 25 pounds per square yard. Actual application rates will be based on the chip design and the actual field adjustments. If the cover material application rate of 25 pounds per square yard is not sufficient to provide a quality job, the Project Managers will jointly determine what the new application rate should be. Contractor must furnish a water truck for dust control and wetting of chips. Arrangements must be made by the Contractor for acquiring water for wetting and sweeping. It will be the responsibility of the Contractor to determine the centerline and place reflective tabs prior to the chip seal. The Department will provide final striping. Contractor shall be responsible for all private property damage claims resulting from performance of the tasks described above.