Wills Point ISD Cooler/Freezer Combo Replacement Manufacturer Specified: Imperial Brown or Comparable Dimensions: 14' x 16'-8" x 8'-7 1/4" cooler/freezer combo Box Description: Walk-in to be constructed of foamed in place urethane insulation and shall have a minimum R-value of 32 with a stucco galvalume exterior and interior finish. Floors to be constructed of .080 smooth aluminum over 1/2 marine grade plywood with interior ramp and to be in both compartments. Doors to be 34" x 78" flush mount self closing and hinged left. Door to include: (3) hinges, 36" high diamond tread kick plate on interior and exterior, thermometer, LED light above door, deadbolt handle, heat cable, and adjustable threshold. Accessories to include: (2) 48" LED light fixtures, 24" deep interior ramp, {2) low temp strip curtains for 34" x 78" net opening, (5) vertical closure trim pieces, {1) membrane roofing package, and {37) prefabricated floor seismic restraints. Voltage and phase to be confirmed by district prior to ordering. Refrigeration Description: Redundant refrigeration to be engineered with Lead/Lag controller for refrigeration systems. o Freezer Condensers: 2ea - 3.5hp condensing units, scroll compressors to be mounted outside and rated for 110 degree ambient temperatures to maintain - 10 degree temperatures inside the walk-in. Weather provisions included. oEvaporators: 2ea - Low profile two fan systems with electric defrost. oCooler Condenser: 1ea - 1hp condensing units, scroll compressors to be mounted outside and rated for 110 degree ambient temperatures to maintain 35 degree temperatures inside the walk-in. Weather provisions included. oEvaporators: 1ea - Low profile two fan systems with air defrost. oLead/Lag controller required. Warranty: 15 Year Panel Warranty, 1 Year Parts and Labor, 4 Year Extended Compressor Warranty INSTALLATION:Installation to be included with bid. Install to be performed by certified refrigeration specialist and to including the following: Receive, unload and stage. Construction of walk-in, hanging of evaporator{s), refrigerant piping between condensing units and coils, condensate drain line routing, heating with pvc to be included, and hanging of lights. The removal and haul off of the existing unit is required. You may email the bid to Jeff Russell at jeff.russell@wpisd.com The method of Contractor Selection has not been Determined at this time
.webp)
