Renovation of a municipal facility in Marblehead, Massachusetts. Completed plans call for the renovation of a municipal facility.

The owner has postponed this project. A new bidding timeline has not been determined at this time. The Contractor shall have the existing paint samples analyzed by a third-party consultant who specializes in this work and consult with the Town Representative for best paint application methods and materials over existing newly prepared surfaces. All exterior building surfaces under this contract are to be cleaned. All exterior building surfaces under this contract shall be scraped and sanded. Surfaces to be restored include but are not limited to: doors (5 sides), window jambs, window frames and muntins, all trim, including corner quoins, window and door trim, soffits, eaves, fascia, gutters, dentils, bed moldings and hardware, to remove loose paint, rust and correct surface imperfections. All loose siding and trim shall be re-nailed or re-affixed, using 1 W stainless steel ring shank nails, or suitable other size and shape stainless steel fasteners. All visible nails and fasteners, with any portion proud of, not flush with or below the surface of wood materials, shall be countersunk and filled. Premium commercial grade putty and caulking materials shall be applied uniformly to all nail and screw holes, divots and dents, all cracks and seams, all damaged wood and metal surfaces. All are to be repaired and sanded smooth, ready for primer coat. All materials are subject to the review and acceptance of the Town Representative. One coat premium tinted oil-based primer shall be applied uniformly to all wood and metal surfaces of the building to be restored. Any and all surface imperfections noted after the primer coat has been applied and is surface dry, shall be repaired to the Town Representative's satisfaction. exterior painting of municpally owned old town house and minor carpentry repair Questions concerning this Request for Quotes must be submitted in writing to: rebeccac@marblehead.org at least five (5) days prior to the due date. Written responses will be sent to all bidders on record as having picked up the RFQ.