SCOPE: The scope of work must include but is not limited to: removing fencing, and replacing with new fencing
per drawings. Contractors Qualifications
Contractor must have five years of experience in fence installation with 25 jobs or more of similar or
larger size over the past five years. If the successful contractor has not performed services for the
district in the previous three years, they must submit a reference list including contact names and phone
numbers. Guarantee
1. All supplies materials and equipment used in the performance of the bid shall be of
the type and quality used in commercial chain-link fence replacement services 9 gauge x 2" mesh.
2. Post spacing shall be spaced a maximum of 10'0" on center, Terminal spans may be
less in order to adjust line spans or even footage.
3. Post Settings - all end & gate posts shall be set in concrete to the appropriate frost
line depth with a belled bottom and concrete kept 3" below grade for backfill material;
all line posts shall be driven unless approved by District. HF40 round tube/pipe should be used.
4. Fittings - all fittings and hardware shall be steel and of commercial grade/appropriate
for use with zinc coated steel fabric or as appropriate if other fabric is specified.
5. Fabric Ties - steel fabric ties must be utilized in all applications unless approved by
District.
6. Fence Removal - when removing fence posts the Contractor shall completely move
the post and any concrete and completely fill and compact the holes with appropriate
soil so that the area is level with the adjacent ground/surface. The Contractor shall
not fill the post holes with the concrete removed from the old posts.
7. Backstops should match the width of the original and have a height of 20' with a full 6' canopy when
specified. The backstop should be 6 gauge galvanized and the top section 9 gauge galvanized.
8. Safety capping on replaced fencing should be replaced with new to match existing.
.webp)
