Renovation of a laboratory facility in Saskatoon, Saskatchewan. Conceptual plans call for the renovation of a laboratory facility.

Elevator Modernization, Laboratory Wing, AAFC Saskatoon Research and Development Centre Description: Agriculture and Agri-Food Canada (AAFC) intends to retain a Contractor to provide construction services for the modernization of the traction elevator in the laboratory wing of Saskatoon Research and Development Centre. All major components will be replaced to increase the safety and reliability of the elevator. The elevator will be upgraded to meet ASME A17.1/CSA B44-2013 code. This will include (but may not be limited to): a. All wiring and travellers b. Gearless Traction machine c. Sheaves d. Landing system e. Controller, Operating Panels and other electrical components f. Fixtures, buttons, interior panels, flooring and g. Door operator, interlock and pickup rollers Optional work under this contract may include the construction services for the modernization of the hydraulic elevator in the front lobby of the same building at Saskatoon Research and Development Centre. All major components would be replaced to increase the safety and reliability of the elevator. The elevator would be upgraded to meet ASME A17.1/CSA B44-2013 code. This will include (but may not be limited to): a. All wiring and travellers b. Power pack including pump, motor and valve c. Hydraulic cylinder and buffers d. Controller, Operating Panels and other electrical components e. Fixtures, buttons, interior panels, flooring and f. Door operator, interlock and pickup rollers Basis of selection: This is a two phase selection process. Bidders responding to this ITT are to submit a bid in two phases. Phase One bids cover only the qualifications and experience of the Bidders, refer to SI05 'Submission of Bid'. Following evaluation of Phase One bids, Bidders are advised of their competitive standing and responsive Phase One Bidders will be invited to submit a Phase Two bid. Phase Two bids cover the pricing. A combination of the Phase One and Phase Two submissions constitutes the final bid. Initially, suppliers are invited to submit bids in the first phase of the selection procedure. Only the Phase One information asked for in the ITT is to be included in Phase One bids, and evaluation of Phase One bids will be carried out only on the Phase One information requested. Construction Time: The Contractor must perform and complete the Required Phase 1 Work by March 15, 2024 from the date of contract award. The Contractor must perform and complete the Optional Phase 2 Work by March 15, 2025 from the date of contract award. The electronic bid must be received on or before the date and time set for the Phase One solicitation closing. The Bidder must ensure the subject line of the email identifies the electronic Phase One bid submission, and should include at minimum the solicitation number. The Bidder should ensure that the following information is included in the main body of the Phase One electronic bid submission email: a. Solicitation number; b. Name of Contracting Authority; c. Bidder name and contact information (contact name, contact email, contact telephone number); d. Bidder return address; and e. Phase One solicitation closing date and time. 3. The Phase One Qualifications Form, and any required associated document(s), shall be in PDF format. The Bidder should ensure that the following information is included in the electronic title of the Phase One Qualification Form PDF document and in the body of the Qualification Form PDF document: a. PHASE ONE QUALIFICATIONS; b. Solicitation number; and c. Name of Bidder. 4. Bids sent in hard copy or transmitted by facsimile will not be accepted. 5. Electronic submissions: Timely and correct delivery of electronic bids is the sole responsibility of the Bidder. a. Canada will not be responsible for any failure attributable to the email transmission or email receipt of the bid including, but not limited to, the following: i. receipt of a garbled or an incomplete bid; ii. delay in the email transmission or email receipt of the bid to the Bid Receiving (aafc.wscprocurement-csoapprovisionnement.aac@agr.gc.ca) e-mail inbox (the date & time on the email received by the Bid Receiving email inbox is considered the date & time of receipt of the bid submission); iii. failure of the Bidder to properly identify the bid and RFP number in the email subject line and in the electronic Bid Documents; iv. illegibility of the bid; v. AAFC server blocking emails and/or attachments (such as potential malware, file size, file formats (unacceptable file formats include, but are not limited to, .zip, .exe, .mp3, etc.); vi. Security of bid data. b. Bids transmitted via email constitutes the formal bid submission. AAFC has restrictions on incoming email messages. The maximum email message size including all file attachments must not exceed 5MB. Zip/exe/mp3 files or links to Bid Documents will not be accepted. Incoming email messages exceeding the maximum file size and/or containing zip/exe/mp3 file attachments will be blocked from entering AAFC's email system. A bid transmitted by email that gets blocked by AAFC's email system will be considered not received. It is the responsibility of the Bidder to ensure receipt. Refer to the attached tender documents to obtain further information. The Crown retains the right to negotiate with any supplier on any procurement. Documents may be submitted in either official language of Canada. The estimated contract period will be 21 month(s), with a proposed start date of 2023/06/01. Tender was cancelled.