Site work and paving for a road / highway in Pueblo, Colorado. Completed plans call for site work for a road / highway; and for paving for a road / highway.

In general, this project will consist of asphalt road improvements on Starlite Drive between Bridle Trail and the City Limits (Little Burnt Mill Road) within Pueblo, Colorado, as detailed in the plans and specifications for this project. Contractor must be capable of, and shall be required to, self-perform at least thirty percent (30%) of the actual labor or trade work (not supervision) required to complete the project. By submitting a bid, Contractor certifies that Contractor's own employees shall be utilized to meet the self-performance requirement. Supervision of subcontractors is not considered self-performance. Failure to meet this requirement may result in the bid being deemed non-responsive. Documented confirmation that Contractor is meeting this requirement during the performance of the work will be required Asphalt shall be removed to the lines and grades established by the Project Manager. Any removal outside those lines and grades not approved by the Project Manager, will not be paid for by the City. Contractor shall properly dispose of all removed items from the construction site. Saw cutting to remove asphalt to a neat line shall not be paid for separately but shall be included in the cost of the asphalt removal bid item. This bid item shall include all costs necessary to complete the asphalt paving work in accordance with the project plans and specifications. It shall include preparation of paving area, furnishing and placing the asphalt paving material and any items incidental to the proper completion of the work. Asphalt paving material shall be Grading SX conforming to the applicable Colorado Department of Transportation (CDOT), Standard Specifications for Road and Bridge Construction, most current Edition, Section 702 and Section 703. The City will allow up to a maximum of Thirty (30) percent of Reclaimed Asphalt Pavement (RAP) in the asphalt mix design. Asphalt cement binder shall be PG 64-22. The Contractor shall submit a Job Mix Formula JMF) for the HMA asphalt to be used on this project. Failure to complete the work by the allotted 90 calendar days shall result in the assessing of liquidated damages according to General Provisions. Question Submission Deadline: May 5, 2023, 12:00pm