This is a service / maintenance or supply contract in Miami, Florida. Contact the soliciting agency for additional information.

Work under this contract includes, but is not limited to the following: Furnishing all supervision, labor, required materials, equipment, tools and performing all operations necessary, including Maintenance of Traffic (MOT) to completely perform Emergency Traffic Signs Repair/Replacement Operations, pursuant to Mayor's, Governor's, or President Declaration of Emergency (Declaration of Emergency). The County, at its discretion, may award more than one contract based on the proposals received and the impacts of events associated with the Declaration of Emergency. Contractor must also: 1. Provide required documentation (placement of County provided decal on sign panel(s) and detailed invoices that include digital photographs of before and after repairs along with GPS coordinates for each location). 2. Include repeated mobilization/demobilization, transportation, supervision, overhead, fuel, insurance, overtime and all other multipliers for direct and indirect costs with the repairs/replacements. 3. Perform Work in accordance with the requirements of the Public Works Manual of Miami Dade County (Public Works Manual), the Miami-Dade County's Traffic Control Equipment Specifications and Standards for The Metro Traffic Control System Miami-Dade County (TCESS), and the FHWA Manual on Uniform Traffic Control Devices (MUTCD). Sign panels must meet the material requirements of Section 700 of the Florida Department of Transportation Standard Specifications for Road and Bridge Construction. B. Detail Scope of Work may include on or more of the following items per location: 1. Furnish and Install complete ground sign assembly (including u-iron base and post; sign panels less than 12 square feet). All ground surface types. 2. Reset existing post and sign, includes all new mounting hardware (5/16 x 2" grade 8 bolts, nuts and washers). 3. Furnish and Install sign panels (less than 12 square feet) to existing u-iron sign post. 4. Remove existing u-iron base and fill in holes (no replacement needed). All ground surface types. C. Contractor and all subcontractors, under this Contract, are prohibited from performing any work, other than specified in the Contract and/or directed by the Engineer, within the limits of the project site, without prior written notification to the Engineer. This includes any work for private or commercial entities