Renovation of a municipal facility in Whistler, British Columbia. Completed plans call for the renovation of a municipal facility.

The proposed project is intended to provide two Aldes heat recovery ventilators model PH20's to the be housed on the roof of the PWY Welding Shop, this is to improve the workshop air quality during wielding process. When quoting please reference the Introba drawings ref 0010327.000 HVAC - Power. Supply two Aldes PH20 heat recovery ventilators including for PH20 roof curbs if required. Exact placement to be confirmed by client and structural engineer once on site. Allow for all required roof penetrations and curbing works. New flashing - Cap details to match existing profile as possible and Colour to match the adjacent buildings. Allow for all lifting - access equipment internal and external to complete the project. Allow for all roof safety barriers and fencing if required. Supply, install and commission all HVAC, electrical plant as per manufacturers details. Install all Supply and Return ductwork including for anchoring, supports and insulation where required. All Drops locations to miss the existing workshop racking crane work, outlets, and any other devices. The overall duct runs and drops to be installed to mirror the Introba drawings ref 0010327.000.but if the subcontractor has a possible alternative route this could considered and reviewed. Allow for all Seismic restraints. Run in power and control cables to the HRV units plus the Thermolec Electric duct heaters. Local override control location to be within the workshop confirmed by client. Provide necessary schedules and documents as required for assurances, warranty. Awarded: Custom Air Works Awarded value not released for publication.