The scope of work includes: furnish all labor, materials and equipment necessary for removal of the existing wet interior coating and exterior coating, including roof; surface preparation; coating of all of the interior wet and exterior surface area, including roof, roof supports, connections, vent, stiffeners, hatches, balcony, ladder, legs, struts, tank and piping; structural and related work; foundation grouting; welding; replacement of bolts; replacement of bolt connections; grinding; dust and spray containment; waste disposal; draining; disinfection; ground surface restoration; repair of ladder safety equipment; recoating stripe; seam seal roof lap joints with urethane caulk; install cathodic clips and couplings for future installation of floating-type cathodic protection system; trim trees, brush and shrubs from site to prevent foundation or paint damage on the structure; re-grade the soil so rain water runs away from the foundations; remove soil on the foundations to expose the top three inches of the foundations; coat the foundations to help prevent further deterioration; drill drainage holes in the balcony to prevent pooling of water; install a 42-inch high railing and a painter's rigging rail on the roof; install rigging couplings on the roof at the existing painter's rigging rail for temporary fall prevention of workers in the wet interior; install rigging couplings under the bowl halfway between each leg and the riser, the couplings would be used by contractors for rigging safety lines during exterior work; install a screened flap gate on the end of the overflow pipe; re-weld broken pipe braces and add additional braces for support; install a concrete splash pad under the discharge end of the overflow pipe to prevent soil erosion; install a 36-inch diameter manway, replace the wet interior roof hatch with a 30-inch diameter hatch; install a handhold at the roof opening for entering and exiting the opening; replace the roof vent with a new frost-free pressure vacuum vent; install a fall prevention device on the exterior leg ladder; install a wet interior ladder with a fall prevention device; replace the sidewall and roof ladder with a vertical ladder and a step-off platform; install a vandal guard on the exterior ladder to prevent access; install a deflector plate at the inlet; install a siphon in the wet interior to completely drain the torus; install a 42-inch high handrail around the top of the riser; and miscellaneous associated work for the Water Tower Recoating, including cleanup. Payment and construction to occur in the year 2023.
.webp)
