Asbestos abatement and renovation of a municipal facility in Trenton, New Jersey. Completed plans call for the renovation of a municipal facility; and for asbestos abatement for a municipal facility.

The objective ofthis project is to evaluate, plan, design and execute the replacement of 27 AHU's and associated equipment within this fully operational office building. Include additional equipment, as needed, to address current humidity control issues. Also included is the design for removal of existing inoperable, abandoned or by-passed equipment and piping and the design and installation of a temporary or permanent opening to facilitate the project, along with removal ofequipment / piping that may impact access and staging. Existing condensate / floor drain failures are to be abated with all new drains and piping or a piping restoration solution beneath the penthouse. Sludge, scaling, and deteriorating issues within existing chilled water piping are to be evaluated and branch piping will be replaced with a value engineering solution for the mains. Hot water piping is to be evaluated and addressed, as needed. Duct lined insulation degradation is to be evaluated throughout the building and particulate and mold discharge will be abated with a permanent solution. Include replacement and energy control of 4 exhaust fans within the garage. Evaluate, recommend and provide design development level ofnew high temperature hot water mains extension in order to by-pass steam generating equipment (owned by Vicinity Energy) and provide necessary exchangers and/or associated equipment from garage entry P2 to mechanical room Pl level