Renovation of a municipal facility in Simsbury, Connecticut. Completed plans call for the renovation of a municipal facility.

The MODIFICATION TO ICE RINK REFRIGIRATION Requires the contractor to pump down and remove the system ammonia charge, drain brine from existing chiller and store on site for re-use. Cut away and remove existing chiller and surge drum. Clean existing housekeeping pad and make any necessary repairs to prepare the housekeeping pad to accept new equipment. Provide and install new chiller. Make all piping connections from chiller to existing refrigeration system. Leak check and pressure test all new piping connections. Insulate new chiller, surge drum and associated piping. Label all new equipment and associated piping in accordance with IIAR standards. Recharge the system with ammonia. Refill the existing cold floor and new chiller with brine, purge air and perform system startup. There is an add alternate for Replacing Cold Floor Secondary Heat Exchange Fluid from Brine to Ethylene Glycol. The scope of work for this project includes furnishing all labor, materials and equipment required to complete the project as specified. Commencement of Work Within ten (10) calendar days of Notice to Proceed. Any questions about this project should be directed to: Mr. Thomas J. Roy, Director of Public Works/ Town Engineer by fax at (860) 408-5416, via email at Pubworks@simsbury-ct.gov, or by mail to Department of Public Works, 66 Town Forest Road, West Simsbury, CT 06092. To receive consideration, such questions must be received by end of business day on Tuesday, January 29, 2024. No oral interpretations shall be made to any respondent as to the meaning of any of the bid documents. Every request for an interpretation shall be made in writing.