Renovation of a water / sewer project in Livingston, Montana. Conceptual plans call for the renovation of a water / sewer project.

The 1 MG tank provides water to approximately 70% of Livingston currently. The City does not have the ability to isolate this tank in the event of failure or necessary repair. In 2016, Stahly Engineering & Associates provided a technical document to detail necessary upgrades to the water system that would enable the 1 MG tank to be offline for more than a day. The City has already taken steps toward this improvement by installing the tank connection PRV. The remaining improvements required for the tank isolation include: 1. Install a tank isolation valve on the 24-inch transmission main to the 1 MG tank 2. Install a drain on the 24-inch transmission main to the 1 MG tank upstream of the isolation valve 3. Install a surge tank with capacity for the active surge volume for the maximum flow rates in and out of the 1 MG tank for a given duration This project is included on the city's fy 2023-2026 Capital Improvement Program. As of October 12, 2023, further details regarding design and construction timelines have not been identified. *Project information has been obtained through a public capital improvement plan (CIP). A CIP is a financial schedule for short- and long-range projects which is updated regularly. Information listed in the CIP often evolves based on funding availability and the project details, including timeline and value, are subject to change. The content management team will continue to pursue additional details as they become available.