Renovation of a transportation facility in Fresno, California. Completed plans call for the renovation of a transportation facility.

Scope: The contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary to perform repair of the horizontal hangar doors. Requirements are listed below in requirements listing. The repairs are a one time service and shall take no more than 30 days to complete. Objective: To be able to open and close the horizontal hangar doors via the existing control buttons. Background: TASMG Hangar (5168 E. Dakota Ave, Fresno, Ca 93727) has inoperable horizontal hangar doors at the Corrosion Control Facility. The facility is located at the south end of the flightline. The inoperable doors currently hinder day to day operations and incur additional time required for maintenance personnel to move aircraft. Requirements: The contractor shall: 1. Replace damaged busbar and necessary hardware 2. Reconnect all conductors 3. Lube points of friction, bearing and rollers 4. Balance and alignment of doors 5. Test door operation Site of Work: 5168 E. Dakota Ave. Fresno, CA. 93727 Corrosion Control Facility on south end of airfield Project Manager: CW4 Lloyd Wilfong Duty Position: Facility Manager Phone Number: 559-347-5653 Email: lloyd.l.wilfong.nfg@army.mil Scope prepared by: SSG Sourtanh Bounxou Duty Position: Purchasing & Contracting NCOIC Phone Number: 559-347-5689 Email: Sourtanh.y.bounxou.mil@army.mil We have scheduled a site visit for Tuesday, 20 June at 1000. The meeting location is at the front gate, 5168 E. Dakota Ave. Fresno, CA.