Asphalt Surfacing The City of Elkton, Kentucky is Now Accepting Sealed Bids for Asphalt Surfacing of Various City Streets in the City of Elkton, Kentucky. Contractor Must Be Pre-qualified to Do Work for the Commonwealth of Kentucky, Transportation Cabinet, Department of Highways, for Work to Be Performed. All Qualified Applicants Will Receive Consideration for Employment Without Regard to Race, Religion, Color, National Origin, Sex, Sexual Orientation, Gender Identity, Age or Disability. The City of Elkton is an Equal Opportunity Employer. The City of Elkton Reserves The Right to Accept Any Bid, to Reject Any or All Bids, and to Waive Any Technicality or Informality in Bidding or Bids Received, Where Such Acceptance, Rejection, or Waiver is Considered to Be in the Best Interest of the City. SPECIFICATIONS
1. Cut back all debris and grass growing on edges of existing pavement.
2. Clean, sweep and spray weed killer on streets on as needed basis.
3. Edge keys are to be cut at terminal ends of overlay.
4. Apply a bituminous tack coat.
5. Level and otherwise install asphalt surface mix as stated for each street.
6. All streets are marked with the starting and stopping points for resurfacing.
7. Areas to be serviced:
A) Elk Fork Road: Install 2" asphalt surface mix approximately 270' in length by 22' wide.
B) Commerce Street: Install 1.5" asphalt surface mix approximately 375' in length by 24' wide.
C) W Jefferson Street: Mill area to be resurfaced and install 1.5" asphalt surface mix approximately 110' in length by 17' wide.
D) E Jefferson Street: Install 1.5" asphalt surface mix approximately 225' in length by 21' wide.
E) S Kennedy Street: Install 1.5" asphalt surface mix approximately 100' in length by 15' wide.
F) E Washington Street: Mill area to be resurfaced and install 1.5" asphalt surface mix approximately 155' in length by 21' wide.
G) S Perry Street: Install 1.5" asphalt surface mix approximately 50' in length by 19' wide.
H) Morningside Drive: Install 1.5" asphalt surface mix approximately 670' in length by 13' wide.
I) S Lincoln Lane: Install 2" asphalt surface mix approximately 210' in length by24' wide.
.webp)
