Site work and paving for a road / highway in Sabattus, Maine. Completed plans call for site work for a road / highway; and for paving for a road / highway.

SCOPE OF THE PROJECT Marsh Road Approximate: Top coat of entire length of rebuilt roadway Grind butt joint on both ends of work area Grind butt joints for driveway match Furnish and install bituminous tack over existing pavement Pave with topcoat. 1.25" X 9.5 mm Keay Road Approximate: First 2100' from Maxwell Road Intersection Remove all existing pavements Furnish and install shim, gravel, if necessary, to create crown Compact and fine grade with two layers: 2.5" X 19 mm 1.5" X 9.5 mm East Ridge Road Approximate: From Sutherland Pond Road Intersection Grind butt joint on both ends of work area Grind butt joints for driveway match Install bit tack over shim area Shim the area to fill in the ruts and allow the water to shed properly Excavate to install 6' wide rip-rap swale areas in two locations to accept water runoff Extend the rip-rap approximately 12' from edge of pavement or to property line Furnish and install bituminous tack over existing pavement Pave the prepared area in one layer; 1.5" X 12.5 mm Questions may be directed to Sabattus Public Works Foreman Designee Tim Pinard, at (207)740-6145. The Town reserves the right to adjust specifications, while in discussions with contractors and final bidder. The Town reserves the right to accept or reject any and all bids for any reason whatsoever, including accepting of the highest bid. *The list of planholders and/or interested bidders is not being tracked by the stakeholders involved with this project. If you are an interested contractor and wish to be listed as a bidder, please notify our editorial staff at addtobidlist@constructconnect.com.