Demolition and site work for an educational facility in Oakland, California. Completed plans call for the demolition of a educational facility; and for site work for a educational facility.

The Scope of work consists of but is not limited to the Contractor to demolish the existing two play structures (area 1 & area 2) and the matting in its entirety. Contractor to do the necessary site prep after demolishing both the play structures. Play structure installation and sensory panel installation is by others. Contractor to install the play matting tiles in (area 1) and coordinate the delivery of play mating tiles on site. No playmatting is required for the sensory panel (area 2). Contractor to also demolish any basketball hoops and tetherball poles (if any) present in the Phase 1 area of the yard. The poles are to be cut flush to the ground and holes to be patched back after the poles are cut. OUSD will procure the play matting tiles. The Contractor to fence their working area (for material delivery and during construction). The Contractor to haul off their materials/debris off site, leave the site clean after the completion of their work. A contract will be executed by OUSD for the play structure and play matting inspection on site. The Contractor must be aware and work around any solar project activities that may be ongoing on site. Please refer to the attached scope document. and work around any solar project activities that may be ongoing on site. Bids must be accompanied by a bidder's bond, cashier's check, or certified check for at least ten percent (10%) of the amount of the base bid and made payable to the Owner, as detailed in the Contract Documents. The Owner will not consider or accept any bids from contractors who are not licensed to do business in the State of California, in accordance with the California Public Contract Code, providing for the licensing of contractors . The Contract Time shall be thirty (30) calendar days, and liquidated damages for delay shall accrue Bids must be accompanied by a bidder's bond, cashier's check, or certified check for at least ten percent (10%) of the amount of the base bid and made payable to the Owner, as detailed in the Contract Documents. Pursuant to the Contract Documents, the successful bidder will be required to furnish a Payment (Labor and Material) Bond in the amount of one hundred percent (100%) of the Contract Sum, and a Faithful Performance Bond in the amount of one hundred percent (100%) of the Contract Sum. In accordance with Section 3300 of said Code, the bidder shall have a Class A - Engineering and/or B-General Building Contractor and SofSurface Certification license at the time of award and shall maintain that license in good standing through Completion of the Contract and all applicable warranty periods.