Reference Number 0000324871 The City of Woodland Park would like to request a rough order of magnitude cost for engineering design and installation for a fire suppression system at City Hall at 220 W South Ave in Woodland Park, CO. The cost will be used for planning the 2024 budget with a target for construction in 2024/2025. There is limited as-built information for the building but the plan set for another project taking place at City Hall is included in the bid documents showing the layout of the building. Please see the following scope of work for this project: Provide an NFPA-13, most current Edition, NICET III design analysis, engineer review for an interior automatic fire sprinkler system design concept for the existing facility, local water flow test and site survey. Sprinkler system design will include protection of combustible concealed spaces as required by the most current edition of NFPA 13. 2) Include 100% AutoCAD and pdf drawings with riser diagram, pipe and head layout. 3) Provide support for preliminary and final design presentations. 4) Assumes water source by owner and must meet fire sprinkler system demands. 5) All civil utilities or fire line underground piping, excavation, cistern, fire hydrant main loop design will be designed by the City On Call Engineering firm and installed by City Contractor or City Crews. Coordination of the design will be required by selected firm. 6) Dept. of Public Works / Woodland Park is also looking to design an upgraded HVAC system in the same building/area. The selected fire suppression design firm will need to coordinate with the HVAC design team to develop plans in accordance with the HVAC design. 7) The drawings indicate the facility has an existing fire alarm system throughout and a design analysis of the existing fire alarm system should be included in the fee. At a minimum this will include tying in new flow switches, tamper switches, and exterior horn/strobe to the existing fire alarm system. In addition, any new HVAC units over 2,000 CFM will have duct detectors that are required to be tied into the fire alarm system. All fire alarm work is to be performed per the latest edition of NFPA 72. Fire alarm contractor shall be licensed through PPRBD. Access above exiting ceilings and within existing walls is going to be required for sprinkler and other MEP installations. Based on the age of the building cutting this access may involve abatement for lead or asbestos. The general contractor will need to carry a certain amount of money for cutting, patching, and re-painting these areas of access. Question Deadline 07/26/2023 at 5:00 PM MT Questions are submitted online Yes
.webp)
