Site work and paving for a bridge / tunnel in Millersburg, Oregon. Design plans call for site work for a bridge / tunnel; and for paving for a bridge / tunnel.

Linn County Road Department is accepting proposals for architectural and engineering and related services, including design and preliminary engineering for the Cox Creek (Waverly Drive) Bridge (City of Millersburg) project. The City of Millersburg has jurisdiction of the Waverly Drive, Cox Creek Bridge. This bridge is on an urban local road that provides sole access to city park areas, city bike trail system, a railroad maintenance center, and a portion of the City domestic sewage treatment system. It is recommended that the proposed, single span bridge, 120 ft. long, accommodate a single, raised pedestrian way (sidewalk) on the east side of the bridge with two travel lanes to the west. Bikes would use the travel lanes and, if necessary, applicable signage (Bikes on Bridge) could be added. The bridge would accommodate a minimum six-foot-wide sidewalk, with eight feet being preferable. The two travel lanes approaching the bridge will be 12 feet in width, and in addition to, some shy distance from railings and curbs. Proposals must be clearly labeled and follow all submission instructions. A DBE participation goal of 8.5% has been assigned for the Contract. As of September 26, 2025, an engineer/design team has been identified. Design to take place from February 4, 2025, to July 28, 2026.