Site work for a road / highway in Breckenridge, Colorado. Completed plans call for site work for a road / highway.

The Town of Breckenridge (Town) is soliciting written bids from qualified parties for the re-painting of Town of Breckenridge Infrastructure. Infrastructure in need of painting are Town streetlights, Town overhead lighting within State Highway roundabouts, and other infrastructure to be assigned. To be considered, interested parties shall submit a written bid by the stated deadline, meet the established criteria as described in the instructions below, and represent their intent, proven capability and true commitment. Information submitted will be subject to verification. The Town will not supply any of the required paint, tools, materials or equipment. The painting process must be completed by October 31st, 2023 and each type of infrastructure must include the specifications outlined in the below full bid instructions and application. Question submission deadline - July 21st, 2023 - 8:00am *The bid list for this project may be incomplete. If you have been invited to bid on this project by the owner, please notify our editorial staff at contentcase@constructconnect.com. Streetlights: Painting of approximately 50 Town streetlight poles and fixtures. Locations within Town of Breckenridge limits. Painting process is to cover decorative streetlight base, streetlight pole, and streetlight fixture Paint is to be a high gloss black Paint is not to cover clear plastic lens or acrylic dome on streetlight fixture Paint is not to be applied to any street signs or Mutt-Mitt dispensers attached to poles Paint is not to cover any TOB streetlight pole identifying stickers Before painting, removal of any non-TOB stickers from pole must be completed by bidder Repair to damage caused by bidder to streetlight fixture, pole, or any other aspect of existing infrastructure is the responsibility of bidder All painted fixtures must be closed and screwed shut once painting is complete All tape or other products used to paint must be removed from before moving on to the next location Closing of parking spots to facilitate painting must be communicated at least a day in advance to Public Works, and approved, by the Town Communication with Town staff to provide project updates must occur at the end of each working day After painting the pole, Town staff will provide the contractor with a new clear lens to insert into the streetlight fixture. The old lens is not to be painted and shall be returned to Town staff All painting must occur without overspray. Overspray occurring to any private property or other unintended Town property will be the sole responsibility of the contractor to repair to original condition. Roadway closures falling within a traffic control plan will not be required for painting of standard 9ft and 12ft tall Town streetlights Overhead Street Light Poles/Fixtures within CDOT Roundabouts and along State Highway 9: Painting of 15 streetlight poles and fixtures along State Highway 9, within Town limits (see attached aps) Painting process is to cover decorative streetlight base, streetlight pole, and streetlight fixture Paint is to be a high gloss black Paint is not to cover clear glass lens on streetlight fixture Paint is not to be applied to any street signs or Mutt-Mitt dispensers attached to poles Paint is not to cover any TOB streetlight pole identifying stickers