Site work for a road / highway in Darlingford, Manitoba. Conceptual plans call for site work for a road / highway.

Removal and Replacement of Highway Gate at Windygates CBSA, Manitoba Vendor is to remove and dispose of current gate. - Gates must be able to be locked in both the open position and closed position. Gates must be locked in the open position by chain and padlock. - Gates must be minimum 4ft from the ground. - The gates must not impede the highway when open. - The gates must be constructed of sturdy but light weight material to ensure they are easily opened and closed but able to maintain Manitoba winters. - Gates must work on a pivot or hinge. - The gates must be supported in the both the open and closed position to prevent sagging. - Reflective tape to ensure they are highly visible - Mounting and supply of solar lights (no electrical hook up available) - Gates must be primed and rust protected or made from rust resistant materials - Stop signs/Close signs on both sides in the center of each gate. - Signs must be 24" by 24" - Closed sign must be bilingual - Hinge assembly to allow for the gates to be removed from the ground post if required. - Collar on the mounting post to allow the gate to be pinned in an open and closed position. - Preference to be given to gates that operate on a hinge or pivot rather than gates that have wheels. - Contractors can leave equipment on site however security cannot be guaranteed if things are left over night. - The new gate can match the old gate, there are no restrictions to materials. - Concrete would be preferred to keep the posts in place rather than gravel Official bid documents must be obtained from www.bgis.merx.com and bid submissions must be done through the Merx platform. No Award-No compliant bids were received.