Site work for a water / sewer project in Hallettsville, Texas. Completed plans call for site work for a water / sewer project.

As of October 31, 2023, this project has not yet been awarded. A timeline for award has not yet been established. Sheridan 16" Waterline Replacement The Successful Bidder must furnish a 100 percent (100%) Performance Bond and a 100 percent (100%) Payment Bond, in accordance with the Instructions to Bidders and the General Conditions. Engineer Estimate: $2,933,055.00 - $3,421,897.50 *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. Approximately 4,900 linear feet of 16-inch diameter High Density Poly Ethelene (HDPE DR-9) water main; 1,108 linear feet of 8-inch diameter Polyvinyl Chloride (PVC) water main; 58 linear feet of 6-inch diameter Polyvinyl Chloride (PVC) water main; 6 16-inch vertical gate valves with manhole assembly; 3 2-inch air release valves with manhole assemblies; 3 6-inch blow-off valves with manhole assembly; with Trench Safety System; auger boring installation for 30-inch casing and water main in the amount of 521 linear feet to cross under TXDOT and UPRR ROW; open-cut installation of 30-inch casing in the amount of 727 linear feet to cross TXDOT ROW; open-cut installation of 16-inch casing and water main in the amount of 493 linear feet to cross UPRR ROW; installation of 1 2-inch copper service connection and 1 3-inch copper service connection; removal and salvage of 1 existing fire hydrant assembly; install 1 new fire hydrant assembly; removal and replacement of concrete curb, concrete sidewalk, concrete driveway, HMAC pavement, rockwall, park landscaping; Traffic Control Measures within TXDOT ROW and UPRR ROW; Observation and Flagging services by RailPros; protection and support of existing utilities; connection to active water mains and capping old lines; and all miscellaneous piping, fittings, and appurtenances necessary for the proper installation as required in the drawings and technical specifications. Last day for questions August 15, 2023, 2:00 PM MT