Site work and new construction of an educational facility in Corvallis, Oregon. Conceptual plans call for the construction of a 687-square-foot, three-story above grade educational facility; and for site work for a educational facility.

Construction and mass timber fabrication services for development of a single-family MPP House prototype and 3-story facade retrofit mockup. 3-story "existing condition" mockup (approximately 30' tall, 25' wide x 8' deep) of a light-wood-frame multifamily housing facade that includes windows, cladding and trim. Mockup must be constructed inside the Emmerson Advanced Wood Products Lab at Oregon State University ("OSU") against the testing reaction wall. Existing condition will be used by UO and OSU's joint design and engineering team to digitally scan and produce construction documents for fabrication of a mass plywood panelized retrofit system by the contractor. Contractor will pre-fabricate a mass plywood panelized facade retrofit system offsite and return to Emmerson Lab to install the panelized system over the "existing condition," which will then be used for documentation of costs by contractor and structural testing by engineering team. Based on completed design research and documentation from University team, Contractor must produce a fully assembled free-standing prototype of a two-story, 687 SF, two-bedroom mass plywood panelized house that includes off-site prefabrication of wall, floor, roof and interior components and final assembly at an outdoor test site at TallWood Design Institute's A.A. "Red" Emmerson Advanced Wood Products Lab at OSU. The construction process will test construction means and methods, including evaluation of shipping efficiency and field assembly, and document costing of materials and labor. Consultant will provide fabrication and construction services to support research activities leading to a three-story facade retrofit using a mass plywood panelized approach and a two-story free-standing single-family fully-assembled housing unit (687SF) that includes systems, plumbing fixtures, equipment and finishes. Consultant will provide detailed cost data/cost model for all fabrication and construction. University will not respond to oral inquiries. Vendor questions must be submitted to competitionsupport@uoregon.edu no later than 5 business days prior to the Closing Date. Please do not follow questions with emails requesting if and/or when responses will be posted. The method of Contractor Selection has not been Determined at this time