Site work for a transportation facility in Scott Air Force Base, Illinois. Completed plans call for site work for a transportation facility.

This solicitation is a Simplified Acquisition solicitation being issued per FAR part 13. The attached PDF (W50S7S23Q0026.pdf) contains evaluation and response details. Responses can be in any format but must demonstrate the information indicated in the solicitation. Responses can use the attached SF1442 as a quote sheet, but if is contemplated, the Contracting Officer will generate a newversion with all updates to the solicitation and clauses for Contractor reviewbefore signing. A is planned for 5 Sep 2023, 0900 (Building 5002, CE classroom). This will encompass four projects: W50S7S23Q0024 B5026 Bathroom renovation. $100k-$250k W50S7S23Q0025 Tail Display, concrete and lighting. $25k-$100k W50S7S23Q0026 Apron Striping. $25k-$100k W50S7S23Q0027 Apron Lighting. Unfunded with funds likely to be received. $100k-$250k These projects will be solicited shortly. All questions and must be directed to 126 Contracting Officer via at 126.arw.msc@us.af.mil. Questions asked within 1 week of solicitation close will be answered at the discretion of the Contracting Officer. Please make good for 30 days, if possible. Emailed are preferred. Late may be rejected at the Contracting Officer's discretion. the solicitation number in the subject line of any . The 126th Air Refueling Wing requires restriping to existing apron & taxiway markings on the 126ARW Apron IAW SOW. The 126th Base Contracting Office is soliciting this Request for Quote (RFQ) to a Firm Fixed Price Contract. This project is solicited as a Small Business -. The NAICS is 237310, the small business size standard is $45 Million. The of this project is between $25,000 and $100,000. Funds are presently for this contract. will be made to the offeror who represents the best to the Government as outlined in accordance with the criteria forth within the solicitation. 1. REQUIREMENTS: a. BACKGROUND: 126th Air Refueling Wing aircraft apron contains the authorized aircraft for the Air National Guard on Scott Air Force Base. It is northwest of building 5026 (5780 Pryor Drive). b. OBJECTIVES: This project will re-stripe the existing apron & taxiway markings on the 126ARW Apron and taxiways as listed in this and shown in the . There are a fewareas that require arrows, warning markings and informational wording. Lot markings to be re-painted in this include any existing painted markings such as stripes, aircraft parking markings, equipment locations etc. no matter howfaded. 2. PROJECT SUMMARY: The Contractor shall furnish all labor, materials, vehicles, equipment, tools, supervision, and administration required to and conduct the following work: a. BASE (CLIN 001): Apron Striping and Markings: i. Taxiway & Taxi Lane Centerline Stripe - Mark the centerline of all taxiways, guidelines on runways, and taxi lanes on aprons as well as parking positions and pads, with the appropriate airfield striping pattern and color according to the UFC. ii. Taxiway and Apron Edge Stripes - When there is little contrast between the fullstrength taxiway or apron boundary and the adjacent paved shoulder or other paved area, mark the edge of the usable pavement with two continuous 6-inch (152-millimeter) -wide retro-reflective yellowstripes separated by a 6-inch (152- millimeter) -wide gap. iii. Taxi lane Edge Stripes (baseline) - This marking consists of two 6-inch (152- millimeter) -wide broken stripes separated by a 6-inch (152-millimeter) -wide gap. The stripes are 15 feet (4.6 meters) long with gaps of 25 feet (7.6 meters). iv. ECP and Restricted Area Lines - Contractor shall mark all restricted area lines and Entry Control Points (ECP) IAW UFC 3-260-04, 6-5.10 and Figure 6-17. *The for this project is based on a financial range. The is listed as the highest possible cost from the range provided by a stakeholder or official project document.