Site work and outdoor lighting for a mixed-use development in Scott Air Force Base, Illinois. Conceptual plans call for site work for a transportation facility; and for outdoor lighting for a transportation facility.

Seeking vendors capable of separating the Scott AFB Airfield Lighting Control System from the MidAmerica Airfield Lighting Control Systems. Potential vendors must have access to ADB Safegate proprietary information. Please review attached Statement of Work for complete details. a. The contractor shall provide, install, and program all necessary proprietary ADB equipment/software for the SAFB and MidAmerica split of the ALCS lighting system into 2 separate systems that can be controlled in either the SAFB tower or MidAmerica airport. After installation of the equipment and all programming is completed, a full function test of both lighting systems to ensure proper operation of said system. b. Contractor shall install a new 2 CPU redundant setup for Scott AFB airfield lighting in building 3900 (Tower) on the 12th floor and 1 new CPU in building 433 (Scott AFB Vault) and be configured for redundant fail-over operation. The existing redundant setup will be configured for MidAmerica use. All equipment and its association in the CAB/12th floor will be clearly labeled to identify which system, Scott AFB/MidAmerica, it is controlling. c. Upon completion, the contractor shall demonstrate correct operation, approved hardware/software "as installed" documents to include make, model, serial number, MAC address, installed software lists, their versions, and Security Content Automation Protocol (SCAP) scan reports verified by a matching Government SCAP scan of the systems, all system manuals, and "as built" drawings.