Renovation of a municipal facility in Greenville, Kentucky. Completed plans call for the renovation of a municipal facility.

Estimated Length of Project: 210 (Substantial Completion) + 30 (Final Completion) ACCOUNT NO. 095-CAYD-WH25-00 The project is interior renovations to the central dining facility (DFAC) at Wendell H Ford Regional Training Center. The scope of the work will include providing an interior queuing area for patrons, renovations to the serving area, and replacement of floors, ceilings, lights and other finishes to update the facility. Materials will match existing. There will be minor cmu work, mostly patching of existing at demolished areas. New work will include gypboard on steel stud framing, vct flooring and suspended acoustic ceilings. A new entrance vestibule will be provided for the queuing area, enclosed with aluminum storefront and glazing. Exterior concrete walk will be removed/replaced as necessary for the new vestibule entrance. Plumbing scope includes removal of a mop basin and associated water, waste and vent lines, removal of floor drains as required and capping the waste below slab. New plumbing will include installation of a new mop sink and providing water/waste lines as required for beverage dispensers. The HVAC scope will consist of replacement of all ceiling supply diffusers and return grilles in the dining room spaces. Demolition will include removal of an exhaust fan/grille in the existing janitor's closet. Thermostats and sensors shall be relocated as required due to demolition of walls. The renovation area will receive replacement lighting to comply with the 2012 International Energy Code. New lighting will be LED. The renovation area will reuse the existing 120/208V, 3-phase, 4-wire power distribution system. Most circuits with be relocated with the load they serve. Category 6 UTP cable will be used for each new / altered voice and data drop. All cable will originate from patch panel terminations and extend via cable tray or j-hooks, and conduit to a termination at a face plate. BONDING: All bids shall be accompanied by a bid guarantee (in the form of a bid bond or certified check) of not less than five (5%) percent of the amount of the lump sum base bid. A 100% Performance Bond and a separate 100% Payment Bond shall be furnished by the successful bidder. All bonding and insurance requirements are contained in the Instructions to Bidders and/or General Conditions. Bonds should be executed by a surety company authorized to do business in the Commonwealth of Kentucky. No Questions Will Be Answered at the Site Visit. All Technical Questions Shall Be Emailed to the Architect/engineer of Record for This Project. All Procurement Questions Shall Be Directed to Buyer of Record for This Project.