This is a service / maintenance or supply contract in Viscount, Saskatchewan. Contact the soliciting agency for additional information.

The scope of work will include drilling a 5" production well and a 2" monitoring well, which will be drilled to a depth of approximately 67 m, which is the required depth to access the Sutherland Aquifer. The scope of work will also include pump selection, installation, and testing by the contractor. The required pump test is a 24-hour constant rate pump test, which is a regulatory requirement for drilling water wells in accordance with Ground Water Regulations administered under The Water Security Agency Act. The PVC casing elevations installed by the contractor in the production and observation wells also need to be tracked in accordance with the Act. The design details for the wells are as follows: Production Well Location: Viscount, SK (NE-29-34-26-W2M) Aquifer: Sutherland Aquifer Group Required Pumping Rate: 62 gal/min (3.9 L/s) Required Borehole Depth: 220 ft (67 m) Casing Diameter: 5" Monitoring Well Location: Viscount, SK (NE-29-34-26-W2M) Aquifer: Sutherland Aquifer Group Required Borehole Depth: 220 ft (67 m) Casing Diameter: 2" Additional Information: Lithology Information The well reports for the wells within 3 kms of the proposed production well and observation wells indicate the following about the geological conditions: Depth (ft) Description 22 Clay 180 Clay 220 Sand and Gravel The geological formation conditions are based on the Water Well Driller's Report (WWDR) #21981, which is the Viscount municipal well located at NE-29-34-26-W2M. Please provide the following information with the quotation: Schedule of availability WCB # Certificate of Insurance