Site work and paving for a mixed-use development in Hammond, Louisiana. Completed plans call for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; and sidewalk / parking lot.

**As of January 5, 2024, this project has not yet been awarded. The project is expected to be awarded sometime in January 9, 2024.** Roundabout Repairs. Scope Provide Material, Labor and Equipment to Repair Damaged Roundabout Brick Wall (2nd Roundabout Just South of I-12 Where the on/off Ramps Intersect). Original Plans and Pictures of Damaged Roundabout Brick Wall Are Attached To Rfp for Reference. Quote is for Roundabout Repairs Only, No Landscaping. Safety is Priority! Contractors Visiting Site Are Urged to Wear High Visibility Clothing and Be Alert for Self-safety While at Site to Obtain Measurements and Information Needed to Provide Quote. Site is Located in A Heavy Traffic Area for on/off Ramps of I-12 Intersection. Failure to initial shall be cause for rejection of the proposal as non-responsive. All proposals shall be signed. Failure to do so shall cause the proposal to be rejected as nonresponsive. All questions should be asked through the electronically. Questions Via email or phone will not be addressed. Any technical questions on Specifications should be addressed in writing to purchasing@hammond.org Repair must be completed within 90 days after purchase order is received. Proposers Are Urged To Promptly Review The Requirements Of All Specifications And Submit Questions For Resolution As Early As Possible During The Submittal Period. Questions Or Concerns Must Be Submitted To The Purchasing Director During The Proposal Period And Shall Become Part Of Your Proposal Package. Otherwise, This Will Be Construed As Acceptance By The Proposers That The Intent Of The Specifications Is Clear And That Competitive Proposals May Be Obtained As Specified Herein. Protests With Regard To The Specification Documents Shall Not Be Considered After Proposals Are Opened. These specifications are written in a manner to invite open competition. Any manufacturer's names, trade names, brand names, or catalog numbers used in the specifications are for the purpose of describing and establishing general quality levels. Such references are not intended to be restrictive unless the RFP states that only the brand name will be considered for reasons of compatibility, etc. The RFP number, Proposers name, address, Louisiana Contractor License number and RFP opening date shall be clearly printed or typed on the outside of the Proposal envelope, if mailed. Only one (1) proposal shall be accepted from each proposer. Alternates shall not be accepted unless specifically requested in the RFP specifications. Proposals can be delivered or mailed. The method of delivery of proposals is the responsibility of the proposer. Normally, bid bonds will not be required on bids for materials, supplies, annual contracts or small labor contracts. If a bid bond is required, it will be specifically requested on the RFP form and included in the specifications.