Renovation of an educational facility in Dexter, Michigan. Completed plans call for the renovation of a 296,270-square-foot educational facility.

Remove portions of existing building as indicated on Drawings including, but not limited to, the following 1. Remove all paving and curbs as indicated on drawings. 2. Remove indicated foundation walls and footings completely. 3. Remove concrete slabs on grade as indicated on drawings. 4. Remove manholes and manhole covers, curb inlets and catch basins. 5. Remove other items indicated, for salvage and relocation. 6. Unless otherwise indicated, fill excavations, open pits, and holes in ground areas generated as result of removals, using specified fill; compact fill as specified in Division 31. Drawings consist of the Contract Drawings including drawings listed on the TITLE SHEET page of the drawing set titled Dexter High School - 22070G for Dexter Community Schools and dated July 31, 2023 and any subsequent Addenda and Contract modifications which may occur. Remove portions of existing building as indicated on Drawings including, but not limited to, the following: 1. Remove all paving and curbs as indicated on drawings. 2. Remove indicated foundation walls and footings completely. 3. Remove concrete slabs on grade as indicated on drawings. 4. Remove manholes and manhole covers, curb inlets and catch basins. 5. Remove other items indicated, for salvage and relocation. 6. Unless otherwise indicated, fill excavations, open pits, and holes in ground areas generated as result of removals, using specified fill; compact fill as specified in Division 31. 1. Exterior Joints: Seal open joints, whether or not the joint is indicated on drawings, unless specifically indicated not to be sealed. Exterior joints to be sealed include, but are not limited to, the following items. a. Wall expansion and control joints. b. Joints between door, window, and other frames and adjacent construction. c. Joints between different exposed materials. d. Openings below ledge angles in masonry. e. Other joints as indicated. 2. Interior Joints: Do not seal interior joints unless specifically indicated to be sealed. Interior joints to be sealed include, but are not limited to, the following items. a. Joints between door, window, and other frames and adjacent construction. b. Other joints as indicated. 3. Do not seal the following types of joints. a. Intentional weepholes in masonry. b. Joints indicated to be treated with manufactured expansion joint cover or some other type of sealing device. c. Joints where sealant is specified to be provided by manufacturer of product to be sealed. d. Joints where installation of sealant is specified in another section. e. Joints between suspended panel ceilings/grid and walls.