Site work and paving for a road / highway in Granville, Vermont. Completed plans call for site work for a road / highway; and for paving for a road / highway.

**As of February 23, 2024 , This project has been awarded to Pike Industries, Inc, with the awarded amount of $139,612.50.** The Town of Granville is seeking bids for paving 5 town highways (North Hollow Road; intersection with VT Route 100 for approximately 100 feet, West Hill Road, Post Office Hill Road, Maston Hill Road and Buffalo Farm Road (current area of pavement); work to include STOP bar striping. Bids are to be submitted with hourly rates for each piece of equipment with Operator, with costs for the STOP bar striping and the cost for pavement. Work to be performed during the 2024 paving season. Contact Information: Cheryl L. Sargeant, Town Clerk Phone: (802) 767-4403 Fax: Email: granvilletown@gmavt.net For additional information: at online The Town reserves the right to reject any and all bids if deemed in the best interest of the Town of Granville. Specifications for paving 5 town highways are as follows; dimensions are approximate: North Hollow Road; intersection with VT Route 100 - 100 feet in length and 20 feet wide, asphalt 4 inches thick laid and then rolled, preparation for non-paved area; 1 load of gravel and grading. Stop bar to be painted. Post Office Hill Road - 3/10 of a mile; 20 feet wide, asphalt 2 inches thick laid and then rolled. Stop bar to be painted. Maston Hill Road - 1/10 of a mile; 20 feet wide, asphalt 2 inches thick laid and then rolled. Stop bar to be painted. Buffalo Farm Road - 0.15 mile; 20 feet wide, asphalt 2 inches thick laid and then rolled. Stop bar to be painted. West Hill - 100 feet in length and 20 feet wide, asphalt 4 inches thick laid and then rolled, preparation for non-paved area; 1 load of gravel and grading. Stop bar to be painted. Use Granville 2024 Paving on the subject line. It is the bidders responsibility to confirm the town has received the bid and it can be opened and read. Emailed bids will be opened and printed at the time set for the actual bid opening. If the contractor has questions regarding the instructions or specifications for this bid; they should be directed to Ken Beattie at Kensinsurance@gmail.com. There is no pre-bid meeting. Bidders should visit the roads and familiarize themselves with the existing conditions.