This is a service / maintenance or supply contract in Toronto, Ontario. Contact the soliciting agency for additional information.

Reference Number 0000261516 Bid Intent Deadline 09-Feb-2024 12:00:00 AM EST This Technical Specification defines the requirements for: 1. Battery electric Bus (BEB) Charging Equipment that will be used in municipal transit garages and at on-route locations within a municipal transit service network. 2. Electric Municipal Fleet Vehicle Charging Equipment that will be used in municipal transit garages or other municipal facilities. The Vendors must present installation-ready solutions to support Bus and Municipal Fleet Vehicle charging in accordance with the requirements described herein. The Vendor must be able to provide all the mandatory Charger types described in this Technical Specification to be considered. This Technical Specification includes the following mandatory Plug-In Charger and Pantograph Charger types, as further described in TS 3.0 Charging Equipment Requirements: 1. Plug-In Chargers: a. Wall-mounted b. Pedestal-mounted c. Mounted overhead and supported by a roof/gantry/overhead platform and equipped with a manual cable reel system d. Mounted overhead and supported by a roof/gantry/overhead platform and equipped with an electric cable reel system 2. Pantograph Chargers: a. Mounted overhead and supported by a roof/gantry/overhead platform b. Supported by a structural mast Only Proponents who possess the experience and qualifications outlined in this Proposal document will be considered for award of this Contract. Metrolinx reserves the right to reject any or all Submissions at its sole discretion. Official bid documents must be obtained from www.metrolinx.merx.com and bid submissions must be done through the Merx platform.