This is a service / maintenance or supply contract in Springfield, Missouri. Contact the soliciting agency for additional information.

(cu 204215) 1-1/4" flange insulating kit: asa 150# series gasket: type f, neoprene-faced phenolic gasket, maximum o.D. = 2-13/16". Single washer set. One piece combined insulating plastic sleeveand-washer piece; and one steel washer per bolt. Separate insulating plastic sleeve and separate insulating phenolic washer are not acceptable. (cu 307258) brass plug per the following specifications: 1. Material: copper alloy no. C83600 in accordance with the requirements of astm b62 or astm b584 per awwa c800, latest revision. 2. Size: 5/8 inch awwa thread 3. Must contain less than 0.25% lead by weight in compliance with the epa sdwa 2011 additions (cu 307260) brass plug per the following specifications: 1. Material: copper alloy no. C83600 in accordance with the requirements of astm b62 or astm b584 per awwa c800, latest revision. 2. Size: 1 inch awwa thread 3.Must contain less than 0.25% lead by weight in compliance with the epa sdwa 2011 additions (cu 305212) 12 inch x 15 to 16 inch all Stainless steel repair clamp per the following Specifications: 1. Shell: 18-8 stainless steel type 304 2. Lugs: 18-8 stainless steel type 304 3. Bolts, washers and nuts: 18-8 stainless steel type 304 4. All stainless steel componnents shall be fully passivated. 5. Gasket: fridded buna-n, sbr or grscompounded for water service 6. O.D. Range: 12.70 to 13.10 inches (12 inch pvc) (cu 309335) amlok steamer nozzle for an american Darling mark-73 traffic model fire hydrant per The following specifications: 1. Hydrant operating direction: open right 2. Valve opening size: 4 1/2 inches 3. For use on hydrant manufactured prior to 1990. Revolving nut o-ring for a us pipe metropolitan m-94 fire hydrant Per the following specifications: 1.) operating direction: open right 2.) valve opening size: 4-1/2 inches 3.) us pipe metropolitan m-94 item #12 Delivery will be an important factor in the evaluation to determine the lowest and best bid. City Utilities reserves the right to award based on lead time or price as it deems appropriate Questions related to this Bidding Event should be directed to the Contact: Morgan Davis Phone: 417/831-8714 Email: Morgan.Davis@cityutilities.net