Renovation of a pre-engineered storage facility in Carmel, New York. Completed plans call for the renovation of a pre-engineered storage facility.

Reference Number 0000339395 The County is soliciting bids for a 45' x 200' steel building. Vendor must furnish all components of a building for a complete install (by others), including primary and secondary steel, all wall and roof panels, gutters and downspouts, insulation, anchor bolts, and doors. Question Acceptance Deadline 01/17/2024 05:00 PM EST Questions are submitted online No -- All Questions Pertaining To This Solicitation Must Be Submitted In Writing At Least (7) Seven Days Prior To Bid Opening. Please Use This Form And Email To ALEXIS.HAWLEY@PUTNAMCOUNTYNY.GOV . General Requirements - Federally Funded - FOB Destination - Insurance Required Award Requirements - All or None Award *The undersigned reserves the right to reject any and all proposals and to accept any proposal or proposals as submitted, or as modified, which in the opinion of the undersigned will be in the best interests of the County of Putnam. SCOPE The County issoliciting bidsfor a 45' x 200'steel building. Vendor must furnish all components of a building for a complete install (by others), including primary and secondary steel, all wall and roof panels, gutters and downspouts, insulation, anchor bolts, and doors. Erection of and site work for the pre-engineered metal building will be contracted for under a separate Request for Bid. Although the selection of a qualified erector will be made under a separate solicitation, vendors under this solicitation are requested to submit with their bid, a list of pre-qualified erectorsthat meet the requirements of the building manufacturer for New York State. 1. 22' eave height (or clear height of 16' minimum) 2. Gable roof 2:12 pitch 3. Roof panels to be 26 gauge screw-down panel; colors to be chosen from standard manufacturer's selection 4. Clear span 5. Bay spacing 7 @ 20 ft. 6. Wall panels to be 26 gauge R-panel; colors to be chosen from standard manufacturer's selection 7. 26ga standard galvalume trim 8. All walls to be sheeted 9. Walls and ceiling insulated with R-30 10. Interior partition wall, insulated, to create office/bunk area. Ceiling of office/bunk area to be insulated and able to support storage above. Final size of office/bunk area to be finalized during shop drawing review. 11. (3) 3/0 x 7/0 wind rated steel door, including all hardware 12. Location of doors and windows to be determined 13. (7) 10 ft. W x 16 ft. H wind load roll up door 14. 6'' Gutter and downspouts at both elevations with downspouts at four corners according to current New York Building Code; Gutters to be manufacturer's standard profile 15. All primary and secondary steel (non-galvanized items) shall be factory primed 16. 125 mph wind load, Exposure C 17. Live load: 20 psf 18. Snow load: 22 psf 19. Building Code: New York State 2020 or latest 20. Provide lead time for delivery (for informational purposes only) 21. Provide warranty information (for informational purposes only) 22. Provide list of pre-qualified erectors (for informational purposes only) 23. See attached preliminary drawing 24. Electrical by others