Renovation of a museum in Oyster Bay, New York. Completed plans call for the renovation of a museum.

Provide and install all specified mechanical systems for a "Maintenance and Operations" 8104sf building and a 2916sf Equipment Shed. Estimated Range: $170,884.00 - $231,196.00 All Requests For Information (RFIs) are due by: 10:00 AM on Tuesday, January 30, 2024, For all technical questions - Utilize the contacts noted below: (Please email everyone) Mr. Adam Katz 631-321-3519 Adam.Katz@parks.ny.gov Mr. Scott Sepela 631-321-3536 Scott.Sepela@parks.ny.gov LIEngineeringContracts 631-321-3544 LIEngineeringContracts@parks.ny.gov For administrative related questions - Utilize the contact noted below: Ms. Margaret Ziminski/ Ms. Tiffany Willms 631-321-3544 LIEngineeringContracts@parks.ny.gov Minority Owned Sub-Contracting Goal: 27% Women Owned Sub-Contracting Goal: 3% Service-Disabled Veteran-Owned Business Contracting Goal: 6% Contract term: 547 Days *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. The Bid opening will be conducted ONLY via WebEx at the link listed below: Join by meeting number Meeting number (access code): 2333 992 7340 Meeting password: BZk2hAP7sa5 Join by phone +1-518-549-0500 US (English Menu) +1-518-549-0059 US (Menú en Español) Global call-in numbers The Contractor shall provide all labor, materials, and equipment required to excavate the lead-contaminated soil from designated areas as shown on the Contract Drawings. A. The scope of work consists of, but not limited to the following: 1. Provide variable refrigerant volume heart pump AC unit, fans, unit heaters, wall mount electric heaters, etc. as shown on the drawings and as specified hereinafter. 2. Provide diffusers, grilles and registers, louvers as shown on drawings and as specified hereinafter. 3. Provide all low leakage control dampers as noted on plans and as specified hereinafter. 4. Provide all new ducting and duct accessories, all new access doors, all new control wiring and conduits, all insulation, all new hangers and supports and all other accessories required for the proper installation and performance of the new equipment. 5. Provide controls for AC units, fans, unit heaters, electric duct heaters and all related equipment as shown on drawings and hereinafter. Provide all required sensors and controllers as shown on drawings as specified and required for a fully functional system. 6. In addition to labor and material guarantee specified herein, the contractor shall provide one-year of service & maintenance starting from the date of completion and testing of the new air conditioning system, heating system units and fans. The schedule of service and maintenance shall be as per unit of manufacturers recommendations. 7. Testing, balancing, and adjusting of the new heating & cooling system and air balancing as specified hereinafter. 8. The general contractor (GC) is responsible for all cores and other openings in exterior walls, interior partitions, slabs, roofing, etc., for ducts, piping, sleeves, conduits, and other penetrations. The Mechanical contractor shall coordinate the locations of all openings with general contractor. 9. The Mechanical contractors shall provide all sleeves, conduit, escutcheons, etc. in the wall/floor/roof penetrations. The general contractor shall provide the fire stopping and/or insulation at all penetrations around the ducts, and conduit, etc. 10. Provide all hoisting and rigging of equipment and material required to complete work of this section. 11. Provide all vibration isolation. 12. Provide all finish work at all penetrations and equipment to include penetrations, penetration sleeves, firestopping, escutcheons, etc. The contractor is responsible for all caulking, sealants, gaskets, etc. related to their work. 13. The contractor is responsible to coordinate work to include equipment pads, louvers, finish patching and painting to be provided under general construction. 14. The contractor is responsible to coordinate work to include equipment raceways and backboxes for automatic temperature control, all starter and disconnects size and locations for equipment provided under this contract. 15. The mechanical contractor is responsible for protecting all construction adjacent to their work. Any damage must be repaired with no additional cost to Owner.