Site work for a water / sewer project in Whistler, British Columbia. Completed plans call for site work for a water / sewer project.

The Project Scope of Work includes: a) Detailed work plan and schedule. b) Upgrading equipment in four Primary Sedimentation Tanks (PST) including chain and flight scraper mechanism, scum trough and finger baffles, and restoring concrete. An outline of the scope of work is listed below (for details see Bill of Materials in the drawing package): 1) PST-1 Longitudinal Collectors: Removal and replacement of drive gearbox, head shaft wall bearing (housing and inserts), unused grease tubing on idler shaft wall bearings, and flight return rails. Reuse all shafts. Cross Collectors: Removal and replacement of drive (480 V motor and gearbox), unused grease tubing on idler shaft wall bearings, and floor rail system. Reuse all shafts. Miscellaneous: Removal and replacement of finger baffles, rotating scum trough pipe c/w drive mechanism, and PST-1 tank concrete restoration (optional). 2) PST-2 Longitudinal Collectors: Removal and replacement of drive (480 V motor and gearbox), unused grease tubing on idler shaft wall bearings, and flight return rails. Reuse all shafts. Cross Collectors: Removal and replacement of drive (480 V motor and gearbox), unused grease tubing on idler shaft wall bearings, and floor rail system. Reuse all shafts. Miscellaneous: Removal and replacement of finger baffles, rotating scum trough pipe c/w drive mechanism, PST-2 tank concrete restoration (optional), and PST-2 concrete joint repair. 3) PST-3 Longitudinal Collectors: Complete removal and replacement of the mechanical system and the drive (480 V motor and gearbox). Reuse all shafts. Cross Collectors: Complete removal and replacement of the mechanical system and the drive (480 V motor and gearbox). Reuse all shafts. Miscellaneous: Removal and replacement of finger baffles, scum trough and drive mechanism, and Facilitate tank concrete inspection. 4) PST-4 Longitudinal Collectors: Complete removal and replacement of the mechanical system and the drive (480 V motor and gearbox). Reuse all shafts. Cross Collectors: Complete removal and replacement of the mechanical system and the drive (480 V motor and gearbox). Reuse all shafts. Miscellaneous: Removal and replacement of finger baffles, scum trough and drive mechanism, Facilitate tank concrete inspection. c) Disposal of removed equipment and materials at a registered solid waste facility. d) Owner supplied equipment: none. e) Installation of equipment related to PSTs. f) Testing and commissioning of all electro-mechanical equipment in all four PSTs, including testing of limit switches and motor hand off auto switches, for four fully functional primary treatment systems. g) Site visit by manufacturer’s representative for commissioning of all four PSTs and Operator training. h) Construction must be complete by substantial performance date identified in the Invitation to Tender. i) All spaces below walkway elevation are confined spaces, with entry permitted through use of a custom staircase, of which there is only one, to declassify the space. The Contractor must follow the RMOW prepared WorkSafe BC approved entry plans while working in these spaces and conform to WorkSafe BC requirements. j) Clean up and restoration of all temporary work to original or better condition. k) Track all fuel consumption and provide to Contract Administrator monthly Documents can be obtained from https://www.whistler.ca/business/doing-business/bidAuigus-opportunities and www.bcbid.gov.bc.ca Tender Enquiries Deadline: Monday, January 27, 2025 at 2:00 p.m