This is a service / maintenance or supply contract in Golden Valley, Minnesota. Contact the soliciting agency for additional information.

The Work shall include all labor and equipment necessary to repair, replace, or relocate gate valves or other potable water distribution components. The Work shall include, but not limited to, excavation; removal and disposal of old gate valves; installation of new gate valves; and backfill and compact the excavated trench. The City shall furnish new gate valves, parts and/or bolts, trucking, and backfill material. Newly installed bolts shall be sprayed with an approved automobile undercoating agent after installation and wrap entire valve assembly in plastic. All bolts on the valve shall be replaced, including the bolts that connect the valve to the existing pipe material. All bolts and nuts used for this project shall be stainless steel or "Core Blue" as approved by the Authorized Agent. Each excavation of gate valve may include supplemental work as follows Contractor certifies that an examination has been made of the scope and location of work and proposes to furnish all necessary machinery, equipment, tools, labor and other means for the Work and to furnish all materials specified in the manner and at the time prescribed in the Contract Documents. Contractor understands that the quantities shown herein are approximate only and are subject to increase or decrease. Contractor further understands all quantities, whether increased or decreased, shall be performed at the unit prices below. The cost of hauling to the dumpsite and the cost of dumping material at the site shall be included in the prices bid for the equipment. For any questions related to the proposal, contact Joe Hansen at 763-593-8038 or jhansen@goldenvalleymn.gov.