Renovation of a water / sewer project in Mills, Wyoming. Completed plans call for the renovation of a water / sewer project.

Project Description. The Project Consists of the Following Services Related to the Mountain View Water Storage Tank Repairs and Painting, Located at 5807 Poison Spider Road: - Demolition of Existing Roof System. - Installation of New Roof System. - Replacement of Existing Manway With Swing-in Type Manway. - Installation of New Roof Vent(S). - Surface Preparation and Coating of Tank Interior and Exterior. the Work Includes Assisting the Central Wyoming Regional Water Systems Joint Powers Board (Joint Powers Board) in Design, Bidding, and Construction Administration. the Entirety of the Project is to Be Funded by the Regional Water System. This Funding is to Cover All Permitting Required by Department of Environmental Quality, Design, Bidding, Construction, and Construction Administration. Scope of Services the Scope of Services Shall, as a Minimum, Include the Following: a. Water Storage Tank 1. The Consultant Shall Design a New Roofing System for the Existing Water Storage Tank Located at 5807 Poison Spider Road. 2. The Consultant Shall Investigate and Design Appropriate Roof Venting for the Tank. 3. The Consultant Shall Develop Coating Specifications for Interior and Exterior Coating Work. 4. Drawings and Specifications Shall Be of Such Quality and Contain Sufficient Details So That No Misunderstanding May Reasonably Arise as to the Extent of the Work to Be Performed, the Materials to Be Used, the Equipment to Be Installed or the Quality of the Workmanship. B. Computer-aided Drafting Format. 1. The Consultant Shall Prepare Final Drawings on a Computer-aided Drafting Format. Digital Format Shall Be Pdf and Dxf and Be Compatible With Autocad Version 2023 Release or Later. C. Construction Drawings. 1. Consultant Shall Provide Two (2) Copies of the "Draft" Construction Drawings and Project Manuals to Be Reviewed by City Staff. 2. The Consultant Shall Prepare a Project Cost Estimate When Plans Are Approximately Fifty Percent (50%) Complete, and Again Two (2) Weeks Prior to Public Advertisement. 3. The Consultant Shall Meet With Representatives From the City During the Course of Preparing Drawings and Specifications to Discuss the Status of the Project. Meeting Dates and Times Shall Be Coordinated by Consultant and Shall Be Set With Input From the City. in Addition, the Consultant Shall Attend Any Interim Special Meetings With City Staff Relating to the Performance of This Contract. The Purpose of the Meetings Will Be to Discuss Elements of Design Alternatives, Project Criteria, Project Status, and Design Options. Consultant Shall Prepare and Distribute Minutes of All Progress Meetings. in Addition, the Consultant Shall Hold Progress Review Meetings at the 10%, 50%, and 90% Levels of Completion of the Project Plans, to Be Held at a City Designated Location. Plans That Are 50% Shall Be Provided to the City a Minimum of One (1) Week Prior to the 50% Progress Review Meeting. Plans That Are 90% Shall Be Provided to the City a Minimum of Two (2) Weeks Prior to the 90% Progress Review Meeting. Progress Review Meetings Shall Be Attended by City Staff and Consultant. 4. The Consultant Shall Prepare and Provide the City Staff and Joint Powers Board for Approval, Final Plans and Specifications, Incorporating Changes Requested by the City and Joint Powers Board. 5. The Consultant Shall Provide the City One (1) Set of Final Plans and Project Manuals Prior to Public Advertisement of Bids. Prior Approval From City Staff Must Be Received Prior to Advertisement for Bids. 6. Final Drawings Shall Be Placed on 11 by 17-inch Paper Sheets.