Site work for a civil project in Baytown, Texas. Completed plans call for site work for a water / sewer project.

Construction of 48-inch CMP outfall including stormwater quality outfall, riprap and overflow spillway improvements in the existing Harris County Municipal Utility District 473 (MUD 473) detention facility. Project is within Harris County Flood Control Facilities as well as MUD 473 facilities. Project is within the City of Baytown. Description of Work. a. Under this Contract, Contractor shall furnish all materials, appliances, tools, equipment, transportation, services, and all labor and superintendence necessary for the construction of the Work as described in these Technical Specifications and as shown on the Plans. The completed installation shall not lack any part that can be reasonably implied as necessary to its proper functioning or any subsidiary item that is customarily furnished, and Contractor shall deliver the installation to Owner in operating condition. b. The Work, in general, under this Contract includes the purchase, installation, and construction of all structures, equipment, and materials, including appurtenances, as indicated on the Plans. Major items of construction and services required are designated as follows: i. Install stormwater pollution prevention systems in channel and pond; ii. Install storm sewer, junction box, timber bent and floatables collection screens; iii. Install riprap in the channel bottom; iv. Grade overflow spillway; v. Repair existing overflow spillway, channel and pond banks if affected; vi. Furnish and install all subsidiary items as necessary to complete the project; vii. Reinstall vegetation (sod or Hydromulch) in the channel and the pond to prevent erosion; viii. Perform testing as specified on installed lines; and ix. Clean-up project area upon completion. 3. Technical Specifications. a. Technical Specifications are of the abbreviated, simplified or streamlined type and include incomplete sentences. The omission of words or phrases such as "Contractor shall," "in conformity therewith," "shall be," "as noted on Plans," "according to Plans," "a," "an," "the," and "all," are intentional. Omitted words or phrases shall be supplied by inference in same manner as they are when a "note" occurs on Plans. b. The Technical Specifications are interpreted to require that Contractor shall provide all items, articles, materials, operation or methods listed, mentioned, or scheduled either on Plans or specified herein, or both, including all labor, materials, equipment, and incidentals necessary and required for their completion. c. Whenever the words "designated," "submitted," "observed," or similar words or phrases are used, it shall be assumed that the word "Engineer" follows the verb as the object of the clause, such as "observed b