Site work and paving for a road / highway in North Beach, Maryland. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Question Deadline 02/13/2024 at 4:00 PM ET All questions related to this bid shall be sent to Stacy Milor, Town Clerk, at northbeach@northbeachmd.org or by phone at 443-646-2415. The Town of North Beach seeks to enter into a contract with a qualified contractor to remove and dispose of portions of an existing asphalt bike path (approximately 150 feet by 5 feet wide) as depicted on the plan included herein marked as Exhibit "A". Once the existing bike path is removed, the successful contractor will inspect the area for erosion, identify problem areas, and advise the Town of North Beach Department of Public Works Director. The contractor will then work with the Town to correct any problems identified. Once any problems are addressed, the contractor will install approximately 150 feet of vinyl sheeting - CML Shoe Guard SG-225 or equal - along the interface of the boardwalk and bike path in the highlighted area, Exhibit "A". A test sheet will be driven to determine the length of the material (sheet) for usage. The vinyl sheeting will be driven to a depth of 4" inches below the existing bike path and clipped. The product shall be installed following all product installation instructions. The vinyl sheeting must be capped with CMI AW-575 STR Cap or equal, per the manufacturer's instructions marked Exhibit "B". Once sheeting has been installed and capped, the area will be backfilled with CR6 material and temped to specifications provided on drawings. The area will be paved per the drawing detail as provided, per Exhibit "A". The work to be performed is in a high-traffic pedestrian area. All work shall be performed safely per all applicable Federal, State, and local laws and regulations. The contractor shall be responsible for a safe working area