Renovation of a residential development in Salt Lake City, Utah. Completed plans call for the renovation of a residential development.

SCOPE OF WORK: Work items include: o Contractor is responsible to compare Scope of work to the house and drawings and submit questions before bid opening. o Obtain building permit and engineering stamp for seismic retrofit. o Remove lower portion of the roof covering and decking from the roof to gain access to top of brick walls for the seismic roof to wall connection. o Install pins, bolts, framing anchors, blocking and straps as per engineering plans and details for the building permit. o Bracing of chimney(s), if applicable, per engineering plans and details for the building permit (2) o After final inspection is completed, install roof decking where removed. o Install new roof covering to match existing, as close as possible, along the perimeter of the home where removed for seismic retrofit. o Clean up and removal of all construction debris. o The Unreinforced Masonry/Wood gable walls will require additional seismic improvements not listed in the Scope of Work. (0) o The seismic improvement may include gable bracing attached to the Masonry/Wood gable. o If shear walls are needed to connect walls to roof, that is part of the roof to wall connection process. o At permitting, a stamped engineered drawing shall detail the seismic improvement procedure. For further information, contact BARBARA TOBIN at (385) 499- 0383 or SHYANN HUGOE at (801) 799-3698. Attendance at the pre-bid meeting is mandatory. If a bid is submitted by a General Contractor that did not attend the pre-bid meeting, it will be rejected. All bids submitted by a General Contractor must contain a detailed Scope of Work. Any changes to the Scope of Work will be issued through an addendum. If issued, the addendum must be acknowledged in the submitted bid to be considered responsive. Any and all work outside of seismic should be at contractors' discretion whether or not they submit a bid.