This is a service / maintenance or supply contract in Addison, Illinois. Contact the soliciting agency for additional information.

To establish a one-year contract for hydrants, hydrant parts, repair sleeves, copper tubing, brass valves, and related materials for the Village of Addison's Water Department. All bids must be submitted on the forms provided in a sealed envelope and include all signatures and information identified in the bid specifications. It is the responsibility of the bidder to ensure bids satisfy the requirements identified in the Bid Documents. The self- addressed label provided with the Bid Documents must be affixed to the outside of the sealed envelope. If there are any errors or inconsistencies found in the Bid Documents, bidders must notify the Village of Addison of those errors or inconsistencies before the due date listed above. The Village of Addison reserves the right to waive all technicalities, and to accept and or reject part(s) of any or all bids which it deems advantageous. Minorities and women-owned businesses (W.B.E.) are encouraged to participate. If you have questions pertaining to this bid you may contact: Ewa Adamow 630-693-7507 Purchasing@addison-IL.org To establish a one-year contract for hydrants, hydrant parts, repair sleeves, copper tubing, brass valves, and related materials for the Village of Addison's Water Department. The following specifications describe these requirements. All of the items listed will be purchased on an asneeded basis in undetermined quantities. Contract prices shall be firm for a one-year period. HYDRANTS: Hydrants shall be Eddy Iowa Model #F-2640 with Break Away Flange & Drain 1) Hydrant shall be center stem type and in accordance with AWWA standard C502-85. 2) Hydrant shall be compression type with the main valve opening with the water pressure and have a rising stem to positively indicate open or closed position. 3) Bronze stem threads shall be located below the main valve to eliminate the necessity of lubrication. In case of damage to the hydrant, main valve will remain mechanically closed. 4) Hydrant shall have a minimum main valve opening of 5 1/4 " 5) Inlet connection shall be 6" 6) Hydrant shall turn counter-clockwise to open, and be painted yellow. 7) Operating nut shall be National Standard. 8) Break-away flange. 9) Hydrant shall be designed to permit the removal of all working parts without special tools. 10) Hydrant shall have an automatic drain, independent of main valve, which can be removed or adjusted without shutting off the water, and that can be cleaned without digging